- COPPER ALLOY
- CONTACT US
Of 2 matters in RoHS,
Our products made by ourselves that is continuous casting, centrifugal castings, extrusions and ingot forms in bronze and brass is clear the limit on RoHS directive in usual conditions.
RoHS directive: It is Restriction of the use of certain Hazardous Substances in electrical and electronics equipment in Eu members. But as well as above products , for using automatic vending machine and automatic dishwasher etc. this directive have spread to plumbing and fittings etc. for a portable water.
|Cr+6(Chromium 6)||1000ppm max||Having for certain rust prevention.|
|Cd(Cadmium)||100ppm max||Having for certain Cd plating.|
|Pb(Lead)||1000ppm max||4%wt under For copper alloys
1000ppm under For solder
*1:Limit in WHO(In RoHS, such as limit is not indicated clearly) As of 2005.May
|Products||Copper alloys||Content(By measure) *2|
(Free cutting brass)
*2:Regarding free cutting brass has already supplied under Cd=75ppm max.
*3:Having dezincification resistance.
Beside if there is a request of analysis for Cd ,we can enter it to material’s mill sheet.
But for Customized certain limit, we will produce products by a make to order.
Matching following materials
JIS lead free
brass ingots CAC In 232 (Pb 0.09%max)
brass castings CAC 232 (Pb 0.25%max)
brass continuous castings CAC232C (Pb 0.25%max)
JIS lead free
bronze ingots CAC In 902(Pb 0.1%max) , CAC In 906 (Pb 0.09%max)
bronze castings CAC 902(Pb 0.25%max) , CAC 906 (Pb 0.25%max)
bronze continuous castings CAC902C (Pb 0.25%max) , CAC906C (Pb 0.25%max)
Regarding CAC902C (continuous castings) , have a large stock par size for parts of water supply.
In addition following normal materials in JIS are agreed for RoHS
|Bronze||CACIn 402,In403 In407||CAC402,403,407||CAC402C,403C,407C|
|Phosphor bronze||CACIn 502,503||CAC502,503||CAC502C,503C|
|High strength brass||CACIn303,In304||CAC303,304||CAC303C,304C|
|Present materials||Contain||Applicable ones||Contain|
|JIS CAC406C(BC6C)||4.0~6.0||JIS CAC407C(BC7C)||1.0~3.0|
|ASTM C83600||4.0~6.0||ASTM C92200(SAE622)||1.0~2.0|
|BS LG2||4.0~6.0||DIN RG5(Pb3)||3.0max|
|JIS C5441B||3.5~4.5||JIS C5441B||3.5~4.0 under|
Deal with each object individually.